SLB™ Branch Office Manager User Guide
248
13: Application Examples
Each SLB branch office manager has multiple serial ports and two network ports. Each serial port
can be connected to the console port of an IT device. Using a network port (in-band) or a modem
(out-of-band) for dial-up connection, an administrator can remotely access any of the connected IT
devices using Telnet or SSH.
Figure 13-1 SLB - Branch Office Manager Configuration
This chapter includes three typical scenarios for using the SLB unit. The scenarios assume that
the SLB device is connected to the network and has already been assigned an IP address. In the
examples, we use the command line interface. You can do the same things using the web page
interface except for directly interacting with the SLB unit (
direct
command).
Telnet/SSH to a Remote Device
The following figure shows a Sun server connected to port 2 of the SLB.
Figure 13-2 Remote User Connected to a SUN Server via the
SLB
In this example, the sysadmin would:
Remote User
Internet
SLB Branch Office Manager
Sun Server
Summary of Contents for 100-120 VAC SLB
Page 114: ...8 Device Ports SLB Branch Office Manager User Guide 114 Figure 8 4 Device Ports Settings ...
Page 131: ...8 Device Ports SLB Branch Office Manager User Guide 131 Figure 8 10 Devices Power Outlets ...
Page 174: ...9 USB Port SLB Branch Office Manager User Guide 174 Figure 9 3 Devices USB Modem ...