11: User Authentication
SLB™ Branch Office Manager User Guide
214
Groups
The SLB branch office manager has 3 pre-defined groups: Administrators, Power Users, and
Default Users. Custom groups can also be created; each custom group is a set of user attributes
and permissions. Local Users and Remote Users defined on the SLB unit can be assigned to one
of the pre-defined groups or a custom group. When a user authenticates, if they belong to custom
group, they will be granted the custom group attributes and permissions, rather than their
individual attributes and permissions. The SLB device supports querying a LDAP server for groups
that a LDAP user is a member of; if any of the LDAP group names match a (Custom Group Name),
the LDAP user will be granted the rights of the custom group.
A custom group cannot be given the name of one of the pre-defined groups: "Admin", "Power" or
"Default" (or any version of these names where the case of the letters is different) since these
names are used for the SLB pre-defined groups. Any LDAP group that matches one of these pre-
defined group names will be ignored and not used to assign rights to a user.
To configure Groups in the SLB:
1. From the main menu, select
User Authentication - Groups
. The following page displays.
Note:
If the fields in the lower part of the page have been populated by viewing another
group, the fields can be cleared by selecting the Reset Group button.
Summary of Contents for 100-120 VAC SLB
Page 114: ...8 Device Ports SLB Branch Office Manager User Guide 114 Figure 8 4 Device Ports Settings ...
Page 131: ...8 Device Ports SLB Branch Office Manager User Guide 131 Figure 8 10 Devices Power Outlets ...
Page 174: ...9 USB Port SLB Branch Office Manager User Guide 174 Figure 9 3 Devices USB Modem ...