Home
/
Lantronix
/
100-120 VAC SLB
/
User Manual

Lantronix 100-120 VAC SLB, User Manual, Page: 207 / 344

Share

Page: 207 / 344

Lantronix 100-120 VAC SLB User Manual Download Page 207

11: User Authentication

SLB™ Branch Office Manager User Guide

207

Kerberos

Kerberos is a network authentication protocol that provides strong authentication for client/server

applications by using secret-key cryptography.
The system administrator can configure the SLB branch office manager to use Kerberos to

authenticate users attempting to log in using the Web, Telnet, SSH, or the console port.
Users who are authenticated through Kerberos are granted device port access through the port

permissions on this page.
All Kerberos users are members of a group that has predefined user rights associated with it. You

can add additional user rights that are not defined by the group.

To configure the SLB unit to use Kerberos to authenticate users:

1. Click the

User Authentication

tab and select the

Kerberos

option. The following page

displays.

Figure 11-7 User Authentication > Kerberos

«
...
205
206
207
208
209
...
»

Summary of Contents for 100-120 VAC SLB

























































































































































































































































































































































Reviews:

No comments