11: User Authentication
SLB™ Branch Office Manager User Guide
189
Local and Remote User Settings
The system administrator can configure the SLB branch office manager to use local accounts and
remote accounts to authenticate users.
1. Click the
User Authentication
tab and select the
Local/Remote Users
option. The following
page displays.
Figure 11-2 User Authentication > Local/Remote Users
The top of the page has entry fields for enabling local and remote users and for setting
password requirements. The bottom of the page displays a table listing and describing all local
and remote users.
To enable local and/or remote users:
2. Enter the following:
Enable Local Users
Select to enable all local users except sysadmin. The sysadmin is always
available regardless of how you set the check box. Enabled by default.
Multiple Sysadmin
Web Logins
Select to allow the sysadmin to have multiple simultaneous logins to the web
interface. Disabled by default.
Sysadmin Access
Limited to Console
Port
Select to limit sysadmin logins to the physical SLB Console Port only. Disabled by
default.
Note:
For security purposes, full administrative access to the SLB via the default
sysadmin local user account can be limited to only the front console port of the
SLB device. See
Limiting Sysadmin User Access (on page 45)
.
Summary of Contents for 100-120 VAC SLB
Page 114: ...8 Device Ports SLB Branch Office Manager User Guide 114 Figure 8 4 Device Ports Settings ...
Page 131: ...8 Device Ports SLB Branch Office Manager User Guide 131 Figure 8 10 Devices Power Outlets ...
Page 174: ...9 USB Port SLB Branch Office Manager User Guide 174 Figure 9 3 Devices USB Modem ...