8: Device Ports
SLB™ Branch Office Manager User Guide
120
Note:
It may take a few minutes for the system to apply the settings to multiple ports.
Port Status and Counters
Port Counters describe the status of signals and interfaces. SLB branch office manager updates
and increments the port counters as signals change and data flows in and out of the system.
These counters help troubleshoot connections or diagnose problems because they give the user
an overview of the state of various parameters. By setting them to zero and then re-checking them
later, the user can view changes in status.
The chart in the middle of the page displays the flow control lines and port statistics for the device
port. The system automatically updates these values. To reset them to zeros, select the
Zero
port
counters checkbox in the IP Settings section of the page.
Note:
Status and statistics shown on the web interface represent a snapshot in time. To
see the most recent data, you must reload the web page.
Table 8-5 Port Status and Counters
Device Ports - SLP Units
On the
page, configure commands to send to an SLP power manager or SLP
expansion chassis that expands the number of power ports.
To open the Device Ports - SLP page:
1. In the
Connected to
field above the IP Settings section of the
page,
select an
SLP
or
SLPEXP
.
2. Click the
Device Commands
link. The following page displays:
Summary of Contents for 100-120 VAC SLB
Page 114: ...8 Device Ports SLB Branch Office Manager User Guide 114 Figure 8 4 Device Ports Settings ...
Page 131: ...8 Device Ports SLB Branch Office Manager User Guide 131 Figure 8 10 Devices Power Outlets ...
Page 174: ...9 USB Port SLB Branch Office Manager User Guide 174 Figure 9 3 Devices USB Modem ...