13
Chapter 2 Hardware Installation
2.1
Hardware installation
2.1.1Unpack switch and check the accessory with packing content list
2.1.2 Mount the switch on desired position. For the best ventilation, it is
suggested to mount the switch on metallic surface.
2.1.3 Connect the M12 connector of power input.
Voltage of Power Input
WV model:
The power input voltage can be from
16.8V to 137.5VDC.
Dual Power Input
Pin assignment of Power input
The power input can be supported redundantly. The supply voltage is
electrically isolated from the housing.
Note:
With single power supply of the mains voltage, the device will
