12
2.4. Wiring the Power Inputs
Please follow the steps below to insert the power wire.
1. Insert AC or DC power wires into the contacts 1 and 2 for power 1, or 5 and 6 for
power.
2. Tighten the wire-clamp screws for preventing the wires from loosing.
[NOTE]
The wire gauge for the terminal block should be in the range between 12 ~ 24
AWG.
Summary of Contents for IPWMR-3004
Page 10: ...6 1 3 Front Panel IPWMR 3004 IPWMR 3006...
Page 15: ...11...
