Lanner NCA-5310, User Manual, Page: 35 / 91

NCA-5310 User Manual
35
Cooling fans may wear down eventually. Please refer to the steps below for replacing cooling fans. When using
a new cooling fan, just reverse the steps to install the fan back onto the enclosure and the system.
1. On the rear panel, loosen the screws that secure the fan.
2. Take out the worn fan and disconnect its power cable connector from the motherboard.
3. Install a new fan by reversing the above steps.
Power supply units wear down eventually. Please be noted that this system supports only 850W PSU. Please
prepare the power supply units matching this capacity.
1. On the rear panel, locate the power
supply units and disconnect the
power cords.
2. Pull the original unit out and replace
it with a new one.
2