NCA-1040 User Manual
24
The motherboard supports a DIMM DDR4 3200MHz non-ECC up to 32GB, which is located on the bottom side
of the motherboard. Please follow the steps below to install the DIMM memory module properly.
1. Power off the system.
2. Turn the system upside down, with its
bottom side facing up.
3. Locate the DIMM socket cover.
4. Unscrew the one (1) screw securing the
cover. And gently lift up the DIMM
socket cover.
5. Align the notch of the DIMM card with
the socket key in the pin slot.
6. Insert the DIMM card at 30 degrees into
the socket until it is fully seated.
7. Push down on the module card until the
slot latches catches and clicks into place.
Notch
Click
Click
Summary of Contents for NCA-1040
