Lanner IIOT-I530, User Manual, Page: 37 / 80

IIOT-I530 User Manual
37
The system supports one mSATA SSD module card for additional memory storage. Please follow the steps for
installation.
1. Power off the system, turn the
system around, and open the
bottom chassis cover.
2. Locate the mSATA slot on the
motherboard.
3. Align the notch of the M.2 memory
card with the socket key in the pin
slot.
4. Insert the M.2 memory card pins at
30 degrees into the socket until it is
fully seated.
5. Push down on the module card and
secure it with a screw.
Notch
Socket Key