Lanner ICS-I372, User Manual, Page: 30 / 80

ICS-I372 User Manual
30
Installing the System Memory
The system supports one system memory slot, please follow the steps for installation.
1. Power off the system, and open the
top and bottom chassis cover, and
remove the top motherboard layer.
Locate a metal partition covering the
DIMM socket placement. Remove the
two (2) screws on the metal partition
on the side and remove the metal
partition.
3. Locate the DIMM socket on the
motherboard.
4. Align the notches of the DIMM
module with the socket key in the pin
slot.
5. Insert the module into the slot at a
diagonal angle and gently press down
until it is firmly seated by the clips on
both sides.
Notch
So
cket
Ke
y
Click
Click