Lanner HTCA-6400, User Manual, Page: 34 / 101

HTCA-6400 User Manual
34
Replacing Cooling Fans
Cooling fans are wearable components and may have to be replaced eventually. Please follow the steps
below to replace cooling fans.
1. Locate the cooling fans at the rear of CPU blades. The fans are covered by a bezel.
2. Rotate and loosen the captive screw that locks the bezel for the cooling fans.
3. Hold onto the loosened captive screw and remove the bezel.
4. Take the worn-out fan out of its original place, and insert a new fan into the system. Repeat same steps
for additional worn-out fan.