Lanner FX-3230, User Manual, Page: 33 / 105

33
FX-3230 User Manual
FX-3230 is built with two 3.5” HDD/SSD slot (HDD preferred) drive bay. The following will discuss disk
drive installation procedures based on their HDD/SSD designs.
1. Power off the system.
2. Locate the 3.5” disk bay on the front
panel.
3. To remove the tray, put your finger
on the tab and push it to the left to
slide it open, hold the tab lever and
pull out the tray.
4. To mount the disk onto the empty
tray, secure the hard disk on the tray
with the provided disk screws. Make
sure the disk connector faces
towards the SATA contacts inside the
system.
5. To install the mounted disk tray, push
the tray into position in the chassis.
Press the hinge tab until it clicks into
place.
3
Disk
Screws
Disk
Screws
4
SATA Contacts
Click
5