AWARD BIOS SETUP
~34~
Video Off Method :
This determines the manner in which the monitor is blanked. The
default setting is “V/H SYNC+Blank”.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blank to the video
buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
Video Off In Suspend :
This determine the manner in which the monitor is blanked. The
settings are: Yes and NO.
Suspend Type :
Select the "Suspend Type" . The settings are: PWRON Suspend , Stop
Grant.
MODEM Use IRQ :
Name the interrupt request (IRQ) line assigned to the modem (if any)
on your system. Activity of the selected IRQ always awakens the system. The default
setting is “3”.
Suspend Mode :
When enabled and after the set time of system inactivity , all devices
except the CPU will be shut off. The settings are: 1/2/4/8/12/20/30/40 Min, 1 Hour ,and
Disabled.
HDD Power Down:
Options are from ”1 Min” “15Min” and “Disable”. The IDE hard drive
will spin down if it is not accessed within a specified length of time.
Soft-Off by PWRBTN:
Pressing the power button for more than 4 seconds forces the
system to enter the Soft-Off state. The settings are: “Delay 4 Sec.”, “Instant-Off”.
Power On By Ring:
Select “Enabled, the system will boot up if there is an incoming all
from the modem. Select Disabled, the system will ignore any incoming call from the
modem.
USB KB Wake-Up From S3:
This option is used to Enable/Disabled USB keyboard wake
up with suspend to RAM.
Resume by Alarm:
This allows a computer to be turned on automatically through the
timer set in the BIOS to make the system more schedulable. By default, this field is set to
Disabled.
