Specifying the E-mail Sender
27
1
Specifying the E-mail Sender
This section explains how to specify the e-mail sender.
To send e-mail, you must specify the name of the sender.
You can specify the e-mail sender by any of the following methods:
• Select the sender from the machine’s sender list
• Select the sender by entering the registration number
• Select the sender by searching the machine’s address book
Note
❒
Senders must be registered in advance under
[
System Settings
]
. For details, see
General Settings Guide.
❒
In
[
System Settings
]
, you can specify the administrator’s e-mail address as the
default sender name. This lets you send e-mail without entering anything for
[
Sender Name
]
. For detail, see General Settings Guide.
❒
Depending on the security setting, the logged-on user may be specified as
[
Sender
Name
]
.
❒
When a protection code has been set, a screen for entering the protection code
appears after selecting the sender. Enter the protection code, and then press
[
OK
]
. If the protection code you entered is correct, the sender name is displayed.
Selecting a Sender from the List
This section explains how to select the sender from the machine’s sender list.
A
Press
[
Sender Name
]
.
B
Select the sender.
C
Press
[
OK
]
.
Summary of Contents for Type 1356
