Lanier LD225, Function Manual

Page: 87 / 138

Making the Settings Related to the Orientation of the Original and Scanned Sides
79
7
Making the Settings Related to the
Orientation of the Original and Scanned
Sides
To correctly display the top/bottom
orientation of a scanned original on a
client computer, original orientation
and page flow must be set when plac-
ing the original.
For E-mail, Scan to Folder, and
a Network Delivery Scanner
A
Make settings for 1 Sided Origi-
nal/2 Sided Original, Original
Orientation, SADF/Batch, Mixed
Sizes, and Divide, and Stamp.
Note
❒
The defaults can be changed us-
ing
[ Original Setting ] , [ Original Ori-
entation Priority ] , [ Switch to Batch ] ,
[ Mixed Original Sizes Priority ] of
[ Scanner Features ] . See p.105
“Scan Settings”.
One-sided original/Two-sided
original selection
A
When scanning one-sided orig-
inals, make sure that
[ 1 Sided
Orig. ] is selected.
B
When scanning two-sided origi-
nals, press
[ 2 Sided Orig. ] to select
[ 2 Sided Orig.: T to T ] or [ 2 Sided
Orig.: T to B ] according to the bind-
ing orientation of the original.
C
When the last page of two-sid-
ed originals is blank, select
[ 1
Side ] to skip that side and finish
scanning, or select [ 2 Sides ] to
scan that side as a blank page.
Note
❒
When [ 1 Side ] is selected for
[ Last Page ]
, the file size will
be bigger than a file resulting
from individually scanning
the same pages. If the size of
the e-mail exceeds the limit
specified, the e-mail cannot
be sent. In this case, change
the setting of
[ Max. E-mail Size ]
of [ Scanner Features ] . See
p.110 “Send Settings”.
❒
If you select [ Divide ] , the set-
ting made here is valid for
the last page of the divided
original.
D
Press
[ OK ]
.
Top to top
original:
Top to bot-
tom original: