Lanier LD225 Function Manual Download

Page: 128 / 138

Appendix

120

Software Supplied on CD-ROM

Table of files

TWAIN Driver

This driver is required to scan an original on the machine.
To use the machine as a network TWAIN scanner, this driver must be installed.

❖

File storage folder

The files are stored in the following folder on the CD-ROM provided with this
machine:

\DRIVERS\TWAIN

❖

System requirements

• Hardware

PC/AT-compatible machines that support the operating system properly

Limitation

❒

Under Windows NT with RISC-based processors (MIPS R series, Alpha
AXP, or PowerPC), this driver is not supported.

• Operating system

Microsoft Windows 95/98/Me
Microsoft Windows 2000/XP
Microsoft Windows NT 4.0
Microsoft Windows Server 2003

• Display resolution

800

600 pixels, 256 colors or higher

CD-ROM

Setup.exe Wizard for the TWAIN Driver and utilities

Drivers

Twain

TWAIN Driver for Windows 95/98/Me,
Windows XP, Windows 2000, Windows NT
4.0, Windows Server 2003

Utility

DeskV2

DeskTopBinder Lite

Summary of Contents for LD225











































































































































Search results

Summary of Contents for LD225

Reviews:

Related manuals for LD225

Brands by name

Popular brands

Lanier LD225, Function Manual

Search results

Summary of Contents for LD225

Reviews:

Related manuals for LD225

Brands by name

Popular brands