Connecting the Machine
14
1
❖
When using in ad-hoc mode / 802.11 ad-hoc mode
1.
If the IEEE 802.11b interface unit is working, it is lit in orange.
2.
If it is connected properly to the network, the LED is green when in ad-hoc
mode or 802.11 ad-hoc mode. If the LED is blinking, the machine is searching
for devices. The LED will light after a few seconds.
Print the configuration page to verify settings.
Note
❒
For more information about printing a configuration page, see "Print List".
Reference
p.158 “Printing the configuration page”
Checking the Signal
When using in infrastructure mode, you can check the machine's radio wave sta-
tus using the control panel.
A
Press
[
System Settings
]
.
B
Press
[
Interface Settings
]
.
C
Press
[
IEEE 802.11b
]
.
D
Press
[
Wireless LAN Signal
]
.
The machine's radio wave status appears.
E
After checking radio wave status, press
[
Exit
]
.
F
Press the
{
User Tools
}
key to return to the User Tools menu.
Note
❒
To check the radio wave status, press
[
IEEE 802.11b
]
under
[
LAN Type
]
on the
[
Network
]
screen.
ZGDH600J
1
2
Summary of Contents for LD1110
Page 14: ...6...
Page 180: ...Printer Features 172 5...
Page 189: ...Address Book 181 7 Folder You can register the protocol path name and server name SMB FTP NCP...
Page 248: ...Other User Tools 240 8...