Printer Features
170
5
PS Menu
This section describes various items of
[
PS Menu
]
under
[
Printer Features
]
.
Default settings are shown in
bold type
.
This menu appears only when the optional PostScript 3 unit is installed.
❖
Data Format
You can select a data format.
• Binary Data
•
TBCP
This setting is not effective when operating the machine with a parallel or
EtherTalk connection.
When operating the machine with a parallel connection, and also if the binary
data is sent from the printer driver, the print job is canceled.
When operating the machine with an Ethernet connection, the print job is can-
celed under the following conditions;
• The printer driver data format is TBCP, and the data format selected on the
display panel is Binary Data.
• The printer driver data format is binary, and the data format selected on
the display panel is TBCP.
❖
Resolution
You can set the print resolution in dots per inch.
• 300 dpi
•
600 dpi
• 1200 dpi
Summary of Contents for LD1110
Page 14: ...6...
Page 180: ...Printer Features 172 5...
Page 189: ...Address Book 181 7 Folder You can register the protocol path name and server name SMB FTP NCP...
Page 248: ...Other User Tools 240 8...
