manualshive.com logo in svg

Lanier LD1110, Operating Instructions Manual

Share
Download
Lanier LD1110 Operating Instructions Manual Download Page 190

Document Server

170

4

Document Server Display

Following explains the screens and icons displayed in the Document Server
function.

❖

Document Server initial display

1.

The operational status or message

is displayed.

2.

The currently selected screen's title

is displayed.

3.

The number of the originals being

read with the memory as well as the
number of paper set and copied are
displayed.

4.

Keys for the operation are displayed.

5.

An icon that corresponds to a

stored function is displayed.

The list display of the Document Server shows the following icons depending on
the stored function selected.

Note

❒

All the stored documents may not be displayed depending on the security
function specified.

APG062S

Function

Copying

Printer

Icons

Summary of Contents for LD1110











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands