Lanier LD1110 Operating Instructions Manual Download

Page: 172 / 234

Connect Copy

152

Connect Copy Display Panel

The display panel shows machine status, error messages and function menus.

❖

Initial copy display

[

Connect Copy

]

Press to switch from the initial copy dis-
play to the Connect Copy display.

Paper Select

Displays the size, type and orientation of
the paper set on both machines.

Numbers of originals

Displays the number of originals scanned
into memory of the main machine.

Number of sets

Displays the number of sets of copies.

Number of copies

Display the number of copies for the main
machine.
Press this part of the display to display the
total number of copies for two machines.

Note

❒

The connect copy function is not available from the simplified display.

APG065S

Summary of Contents for LD1110











































































































































































































































Search results

Summary of Contents for LD1110

Reviews:

Related manuals for LD1110

Brands by name

Popular brands

Lanier LD1110, Operating Instructions Manual

Search results

Summary of Contents for LD1110

Reviews:

Related manuals for LD1110

Brands by name

Popular brands