Lanier LD1110, Operating Instructions Manual

Page: 121 / 234

Copier Functions
101
2
Border Erase (different width)
This mode erases the edge margin of the original image.
A
Press [ Edit ] .
B
Press [ Erase Border ] .
C
Press [ Different Width ] .
D
Press the key for the border you want to change and set an erase width with
[
n
] and [
o
] .
Pressing [ n ] or [ o ] changes the width in increments of 1 mm (0.1 inch).
Pressing and holding down the relevant key changes the width in increments
of 10 mm (0.4 inch).
If you select to erase the image on the back of the original, press
[ 2 Sided Set-
ting ] and [ Back ] .
Erasing the image on the back is valid when you copy 2-Sided originals.
E
Press [ OK ] .
F
Place the originals, and then press the
{
Start
}
key.