Lanier LD1110 Operating Instructions Manual Download

Page: 115 / 234

Copier Functions

Scanning Position

You can move the scanning position of originals.

Point from which the machine begins scanning

Note

❒

You can move the scanning position upward, downward, to left and to right
up to 30 mm (1.2") in 1 mm (0.1") steps.

Top: 0 – 30 mm, 0" – 1.2"

Right: 0 – 30 mm, 0" – 1.2"

Bottom: 0 – 30 mm, 0" – 1.2"

Left: 0 – 30 mm, 0" – 1.2"

Press

[

Edit

]

Press

[

Scan Position

]

Set the scanning position for the front of the original. Press

[

↑

]

[

↓

]

to set

the top or bottom position. Press

[

←

]

[

→

]

to set the left or right position.

Summary of Contents for LD1110











































































































































































































































Search results

Summary of Contents for LD1110

Reviews:

Related manuals for LD1110

Brands by name

Popular brands

Lanier LD1110, Operating Instructions Manual

Search results

Summary of Contents for LD1110

Reviews:

Related manuals for LD1110

Brands by name

Popular brands