Lanier 5580 Operator'S Manual Download

Page: 13 / 252

Making Copies

Making Copies

1 - 1

Making Copies

Turning the Copier Power ON

Press the Power Switch to the ON position to turn your copier ON.

•

After about seven minutes, the message “READY” is displayed
on the Touch Screen.

•

If the Electronic Access Code feature is activated, the message
“Enter job access code” is displayed.

Enter your four digit access code.

See “Entering Access Codes” on

page 3-1.

Placing Your Original Document

Place your original document.

•

Face-down on the Exposure Glass. Align your original to the indicator mark representing the size of original
being copied.

•

Face-up in the Document Feeder.

Place your original(s) on the copier in one of the following ways:

• Face-down, directly on the Exposure Glass

• Face-up in the Document Feeder

Summary of Contents for 5580





























































































































































































































































Search results

Summary of Contents for 5580

Reviews:

Related manuals for 5580

Brands by name

Popular brands

Lanier 5580, Operator'S Manual

Search results

Summary of Contents for 5580

Reviews:

Related manuals for 5580

Brands by name

Popular brands