Lanier 5515, Operator'S Manual

Page: 40 / 97

Bypass Copying
4 - 2 Copying Methods
3
Lightly insert the copy paper face down and
adjust the paper guide.
1 Horizontal size
2 Vertical size
3 Paper Extender
4 Paper Guide
•
Do not stack paper over the limit mark;
otherwise a skew image or paper
misfeeds might occur.
•
Set the direction of the copy paper to
landscape.
•
Swing out the extender to support larger size copy paper (larger than 8 1 /2”× 11").
•
Fan paper to get air between the sheets and avoid a multi-sheet feed.
When Copying onto OHP Transparencies
Lightly insert the OHP transparencies face up and
adjust the paper guide.
4
Push down the paper guide release lever.
•
If you set 8 /2” x 11" or larger copy paper,
hold the edge of the paper and push down
the paper guide release lever.
•
If you do not push down the paper guide
release lever, a misfeed might occur.