Lanier 5455, Operator'S Manual

Page: 31 / 184

Size Magnification
Copier Functions 3 - 11
Size Magnification
1
Measure and specify the lengths of the original
and copy by comparing “A” with “a”.
2
Touch the Reduce/Enlarge key.
3
Touch the Siz Mag. key.
4
Enter the length of the original (A) using the
keypad.
5
Touch the # key in the display.
6
Enter the length of the copy (a) with the keypad.
7
Touch the # key in the display.
•
To change length entered, touch the Clear key
or press the Clear/Stop key. Then enter a new value.
•
To change a length entered after touching the # key, select original or copy and
enter the desired length.
8
Touch the OK key two times.
Calculate a ratio from the lengths of the original and copy for enlarging or reducing the copy.