Lanier 5455, Operator'S Manual

Page: 159 / 184

Specifications
Specifications 9 - 1
Specifications
Main Copier Unit
Item Description Note
Configuration: Console
Copy Process: Dry electrostatic transfer system
Original: Sheet/Book/Objects
Original Size Maximum: Ledger (A3)
Copy Paper
Size: Maximum: Ledger (A3)
Minimum: Statement
(A5) lengthwise (Paper tray / Duplex)
Bypass non standard:
Vertical size: 4.0" to 11.7"
Horizontal size: 5.6" to 17.0"
Copy Paper
Weight:
System stand/Duplex: 14 to 34 lb, 64 to 105 g/m
2
By-pass: 14 to 110 lb, 52 - 157 g/m
2
Reproduction
Ratios: Inch version (%): 400, 200, 155, 129, 121, 100, 93, 85, 78, 73, 65, 50
Metric version (%): 400, 200, 141, 122, 115, 100, 93, 82, 75, 71, 65, 50
Zoom: Inch version: 25% to 400% in 1% steps
Metric version: 25% to 400% in 1% steps
Copying
Speed 5455: 55 CP/M (Letter, A4, sideways)
5470: 70 CP/M (Letter, A4, sideways) 34 CP/M (Ledger, A3) Full size
Repeat copy
mode
Resolution: Scanning: 600 dpi
Printing:400/600 dpi
Gradation: Scanning and Printing: 256 levels
Warm-up
Time: Less than 330 seconds from Off mode
Less than 30 seconds from low power mode
First Copy Time
(1st Tray): Less than 3.5 seconds Letter, A4
sideways
Copy Number
Input: Ten-key pad, 1 to 999 Count up or
count down
Manual Image
Density Selection: 5 steps
Automatic Reset: 60 seconds is the standard setting; it can be changed with a UP mode.
Auto Shut Off: 60 min. is the standard setting; it can be changed with a UP mode.
Copy Paper
Capacity: Paper Tray: 500 sheets (up to 56 mm, 2.2") x 2
By-pass Feed: 50 sheets (up to 5.5 mm, 0.2
"
)