Lanier 5455 Operator'S Manual Download

Page: 149 / 184

Removing Misfeeds

Service and Supplies

8 - 7

Removing Misfeeds

When a Paper Misfeed Occurs

Check the Message Display to see where the misfeed is located.

Open the Front Cover and identify the
location of the misfeed letter designator.

•

Misfeed in the Paper Path: B, C, D, E

•

Misfeed in the Duplexer: A

•

Misfeed in the Document Feeder: P

•

Misfeed in the Bypass Feeder: Z

•

Misfeed in the System Stand: Y

•

Misfeed in the Sorter: R

•

Misfeed in the LCC: U

Remove the paper misfeed following the
instructions on the inside Front Cover.

When a misfeed occurs:

•

The copier stops.

•

The Misfeed Indicator turns ON.

•

The Message Display indicates a paper misfeed and provides a letter designator of the

location of the paper misfeed.

•

Inside the Front Cover identifies the locations of the letter designators.

Summary of Contents for 5455

























































































































































































Search results

Summary of Contents for 5455

Reviews:

Related manuals for 5455

Brands by name

Popular brands

Lanier 5455, Operator'S Manual

Search results

Summary of Contents for 5455

Reviews:

Related manuals for 5455

Brands by name

Popular brands