37
Fig.
60
• To switch on the network, you need to
select the relevant release signal
activation setting.
Fig.
58
• Switching output 3 is used for the
network.
• When networked and depending on the
setting, switching output 3 is activated
via the large-surface push-button
-
- via the large-surface sensor
- via the large-surface vibrator
- or via both.
Example: Selecting "VPB" activates optical
feedback on all networked devices during a
red phase. The release signal sounds once
on the next release after red. Therefore, the
release signal will sound exclusively when a
request is made by pressing the vibrator
push-button.
Where this is concerned, the EK 533 plus
automatically makes a new request during
red when a request is made during green.
Fig.
59
• To guarantee network functionality, all
networked EK 533 plus devices must be
set to be networked. In addition, a
number of parameters are automatically
adjusted when network mode is
selected:
Summary of Contents for EK 533
Page 6: ...6 4 6 Block diagram Fig 3...
Page 17: ...17 Fig 22...
