34
Notes
• If the Langmatz EK 533 plus has no built-in RTC, this option is not available.
• Do not use the same optional input for the sound for night-time sound reduction and
(de)activation (e.g. do not use "Opt. 1" to control the reduction and also (de)activation on
release signal).
Mode
Fig.
52
• This parameter determines whether an
optional input (selected under "Input")
activates the signal or deactivates it, e.g.
for night-time deactivation. In other
words, you can expressly specify
whether a signal is switched on or off by
an optional input.
• If you select "Activation", the actual
signal (i.e. red or green) must also be on
the optional input selected in order to
produce a sound.
Example 1:
Orientation sound: "Activation" selected under "Mode", "Opt. 1" as an input and "high" under
"Logic type". The orientation signal will then sound exactly when the red signal is on the EK 533
and optional input 1 is set to high.
Logic type
• Setting option "low" or "high" based on
the required logic for the optional input.
Fig.
53
Summary of Contents for EK 533
Page 6: ...6 4 6 Block diagram Fig 3...
Page 17: ...17 Fig 22...
