- 48 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
[email protected]
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
Software Installation
15
Put the device into service as described in chapter 13 before installing the software. Start the
installation process by inserting the installation CD with the ChipScan-Scanner software into the
CD drive or connecting the USB memory stick to the computer.
Installing the scanner driver
15.1
Windows installs the scanner driver automatically when the FLS 106 scanner is connected to the
respective PC. The driver does not have to be installed by hand.
Process:
a) Connect the scanner to the PC via a USB type A/B cable (section 14.6).
b) Switch on and boot the PC.
c) Switch the scanner on (section 14.8)
d) Insert the installation CD or plug in the USB memory stick.
Then on the PC:
1)
Open the Windows system control, search for and open the device manager.
2)
Double click the "Trinamic Stepper Device" entry under "Other devices" in the device
manager.
Figure 53: Device manager with the "Trinamic Stepper Device" entry and a warning sign
3)
Select the "Driver" tab and click
"Update driver…" in the open characteristics window.
