LANGER
EMV-Technik
6
DE-01728 Bannewitz
[email protected]
www.langer-emv.com
NNB 21 set
5 Safety Instructions
5.1 General Safety Instructions
When using a Langer EMV Technik GmbH product, please observe the following safety instruc-
tions to protect yourself against electric shock or the risk of injury.
The use of the device must be carried out by personnel who are experts in the field of EMC and
who are suitable for this work under the influence of interference voltages and burst fields (electri-
cal and magnetic).
-
The operating and safety instructions of all devices used must be observed.
-
Damaged or defective devices must not be used.
-
Before operating a measuring station with a product of Langer EMV-Technik GmbH, carry out a
visual inspection. Damaged connecting cables must be replaced before operation.
-
The product of Langer EMV-Technik GmbH may only be used for applications for which it is
intended. Any other use is not permitted.
5.2 Intended Use
The NNB 21 artificial network is designed for measuring conducted interference emissions from
electronic assemblies. Measurements can be carried out in the frequency range from 100 kHz to
100 MHz based on the CISPR 25/ISO 7637 standard. The range has been extended to 1 GHz for
measurement during development. The NNB 21 is built according to its specified use, therefore it
must only be used for this purpose.
5.3 Reasonably foreseeable Misuse
Reasonably foreseeable misuses of the NNB 21 set are:
-
Use of the product outside of the given specifications.
-
Modification or changing of the product without consent of Langer EMV-Technik GmbH.
-
Operating the product with a technical fault.