Page 6
RIGHT SIDE VIEW
6.3mm input jack. Plug your signal input in here, either direct from your guitar or from your
pedalboard setup.
LEFT SIDE VIEW
6.3mm output jack. This is a multi-purpose output that can be used either as a line level output, or as
a traditional effect send to your other gear. As this is transformer isolated, it is also possible to use
this output directly into the front end of another amplifier, effectively making the LOUDPEDAL a high-
quality distortion/boost pedal with no requirement to use the loudspeaker output.
6.3mm jack to connect the output of your FX loop gear back to the LOUDPEDAL. This is an insert type
loop; all the signal is sent through your external gear. Inserting a jack here will break the signal path.
6.3mm jack to output your signal to your speaker cabinet. Use this output when using the
LOUDPEDAL as an amplifier directly into a passive 8-16 OHM speaker cabinet. Do not connect this
output to any other gear such as an effect unit or another amplifier input.
NOTE: Minimum impedance for your speaker cabinet is 8Ω
