Page 16
ROUTING 101
ROUTING
You may set the routing mode globally, or for each preset. Routing controls the
internal signal routing within the BCC-TDE. Each routing option has different
characteristics and outcomes so be sure to choose the correct routing mode you
require, thinking about what outcome you would like to achieve.
The different routing options are as follows.
STEREO
The routing of the pedal is split equally between the left and right outputs. If a mono input is used,
then the output is split equally left and right. If a stereo input source is used, then the stereo integrity
of the input signals is maintained through the pedal. Any panning applied to the stereo inputs pre the
pedal, will pass through the pedal unaltered.
XFB
A tap off from the feedback from delay 1 is sent to the input of delay 2 whilst a tap off the feedback of
delay 2 is sent to the input of delay 1.
PING PONG
The delay repeats alternate between the left and the right channels giving the impression of bouncing
from one side to the other.
Note. This will only be heard if both the left & right output jacks are connected.
Summary of Contents for Black Country Customs THE DIFFERENCE ENGINE
Page 1: ......
