Laney Black Country Customs THE DIFFERENCE ENGINE, User Manual

Page: 15 / 37

Page 14
SCROLLING THROUGH PRESETS
The BCC-TDE can store and recall up to 100 PRESETS , we’ve preloaded each pedal
with factory presets to get you started and to show you some of the capabilities of the
BCC-TDE.
Note. We’re really proud of our presets, we’ve worked with a lot of great artists and
people in the industry to give you the best selection available!
RECALLING A PRESET
Recalling a preset is easy! In the PRESET MODE you can use the two footswitches to scroll up and
down the saved presets. A short press will move 1 preset at a time, whilst holding the footswitch will
scroll up/down presets until you release.
PRESET
↳
NUMBER
↳
NAME
↳
SAVE
↳
COPY
You can also change preset via the PRESET submenu. To access the PRESET submenu from the home
screen.
• Press MENU.
•
Use EDIT to scroll to the PRESET sub-menu.
•
Press MENU / EDIT to enter the sub-menu.
From the PRESET submenu you can then recall patches:
•
Use EDIT to select the patch number “NO:”
•
Press MENU / EDIT to enter the patch number selection.
• Use the EDIT to scroll through patches.
•
Press MENU / EDIT / MODE to exit.
EDITING A PRESET
Once a PRESET has been edited, a * will appear next to the preset name.
Warning! If you power off the device, all unsaved changes will be lost.If you switch patches before
saving you will also lose any changes.
QUICK EDITING
Editing a PRESET is a breeze, when the PRESET is recalled, you can adjust PARAMETERS within the
PRESET via the Surface controls on the pedal surface. These surface controls allow you to quickly
adjust the following PARAMETERS:
•
COLOUR
•
MIX
•
TONE
•
REPEATS
Also adjusting the EDIT control will adjust the delay time. Pressing the edit encoder will select with
unit of time to be adjusted. Making it easy to adjust from long to short delay times.