IDENTITY CARD
SERIAL NUMBER
USER NAME
DATE OF MANUF.
DATE OF FIRST USE
DATE OF PURCHASE
TYPE OF THE EQUIPMENT
REF. NUMBER
PERIODIC EXAMINATION AND REPAIR HISTORY
1
2
DATE
REASON FOR
SERVICING/REPAIR
3
4
5
CONDITION OF DEVICE
AFTER SERVICING
NAME AND SIGNATURE
OF COMPETENT PERSON
NEXT
EXAMINATION
DATE
Instruction Manual
RETRACTABLE TYPE FALL ARRESTER
Ref.: XPRHCR20010
Read carefully
the manual
before use
the equipment
RETRACTABLE TYPE
FALL ARRESTER
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED.
THE IDENTITY CARD SHOULD BE FILLED IN ONLY BY A COMPETENT PERSON RESPONSIBLE FOR PROTECTIVE EQUIPMENT.
THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE OF THE EQUIPMENT. ANY INFORMATION ABOUT THE EQUIPMENT
LIKE: PERIODIC INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED.
THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION. DO NOT USE THE EQUIPMENT
WITHOUT THE IDENTITY CARD.
The retractable-type fall arrester device CR/WR a component of the personal protective equipment against falls from a height and
conforms to EN 360:2002. The fall arrester CR/WR is the protection for one person only.
The working length: CR 200 - 6 m/10 m/12 m/15 m ; CR 220 - 6 m/11 m; CR 300 - 18 m/20 m/25 m/28 m ; WR 200 - 6 m.
ESSENTIAL FEATURES
type of the equipment
Reference number of the device including
the working length of the device
cable/webbing length
serial number of the device
month and year of manufacture
device manufacturer or distributor
MARKING OF THE FALL ARRESTER
Reference No.:
Cable length:
Serial number:
Date of manufacture:
CR 200 15
15 m
0000000
12.2005
Number of European Standard
CE mark and number of notified body inspecting the
equipment according tothe article 11 of Directive 89/686/EEC
Month and year of the manufacturer's next inspection.
Don't use the device after this date.
Attention: Before the first use mark the date of the first inspection
(date of first use +12 months, (e.g. first use 01.2006 - mark inspection
01.2007)
Edition
: EN
/
20
2
04-3
3
1
-
0
Working cable made of 4mm
galvanized wire rope (CR200,
CR210, CR300) or 5mm
stainless steel wire rope (CR220)
ø
ø
.
Connecting handle
-for transporting and anchoring
to structure
Informative and identity labels
Cable/webbing retractor with brake
and energy dissipating mechanism
inside plastic casing
Snap hook with swivel function
(Range of alternative hooks
with fall indicator as an option)
Working webbing made of 22mm
polyamide webbing
Reference No.:
Cable length:
Serial number:
Date of manufacture:
CR 200 15
15 m
0000000
12.2005
RETRACTABLE TYPE
FALL ARRESTER
Reference No.:
Cable length:
Serial number:
Date of manufacture:
WR 200 06
6m
0000000
12.2005
RETRACTABLE TYPE
FALL ARRESTER
before use
read the manual
admissible weight
of the user
store the device in
a protected place
Inspect the device
before each use
range of operating
temperatures
check locking before
each use
the device allowed to
horizontal usage and
against falls over the edge
maximal admissible
deflection of the cable
from the vertical line
use only a full body
harness conformed
to EN 361
don't realese rapidly
unwinded cable
don't repair the
device yourself
don't use the device
with damaged
cable
120 kg
+ AZ 800
}
WITHDRAWN FROM USE
The fall arrester must be withdrawn from use immediately when any doubt arise about its condition for safe use and not used again
until confirmed in writing by device manufacturer or his certified representative after carried out the detailed inspection.
The fall arrester must be withdrawn from use immediately and sent to the device manufacturer of his certified representative to
carry out detailed inspection when it has been used to arrest a fall. Any repair or service operation shall only be carried out by fall
arrester manufacturer or his certified representative.
PERIODIC INSPECTIONS
After each 12 months of utilization the fall arrester must be withdrawn from use to carry out manufacturer's detailed inspection. The
inspection must be carried out by the fall arrester's manufacturer or his certified representative only. During this inspection will be
established admissible time of the fall arrester use till next manufacturer's inspection. The result of inspection must be recorded in
Identity Card.
I S
I
ADM S IBLE T ME OF USE
er
no m
ion t e us
e
r
abl f
e t
condi ion h
c i p t ons a e
arly arr ed
Th e is
li itat
of im of e th ret act
e all arr s er on
t
t at periodi ns ec i
r regul
c
i
out.
Notified body, at which the European certification
was performed and which supervises
the production of the equipment:
APAVE SUDEUROPE SAS - CS-60193 - 13322 MARSEILLE CEDEX 16 - FRANCE
Hlucinska 1 / 96, 747 23 Bolatice Tel: + 420 553 751 111
Fax::+ 420 553 654 125
E-mail: [email protected], www.lanex.cz