Landoll Brillion Turfmaker II, Operator'S Manual

Page: 98 / 108

5-10 9K998-0522
MAINTENANCE
Warning Lamps
When plugging in the 7-Pin Warning Lamp Connector:
1. Make sure the Tractor has a good clean Receptacle,
free of dirt and corrosion.
2. Make sure the 7-Pin Connector is inserted ALL the
way in. With tighter fitting pins, operator may think
the Connector is all the way in, but it really isn’t.
3. Make sure the Tractor Receptacle Cover latches
over the keyway on the 7-Pin Connector to hold the
Connector in place.
If an operator plugs in the 7-Pin Connector, but the lights
do not seem to work right, check the above items to
make sure there is a good connection with the 7-Pin
Connector.
Figure 5-14: Warning Lamps
Amber
Lamp
Warning
Lamp Harness
Flasher Control
Module
7-Pin/4-Pin
Harness
Red Lamp
Amber
Lamp