Landoll Brillion Turfmaker II, Operator'S Manual, Page: 50 / 108

2-34 9K998-0522
ASSEMBLY
27. Install Front Seed Shaft Coupler and tighten Rear
Seed Box Feed Roll Coupler Assembly Set Screws
against the Seed Shaft and tighten Jam Nuts against
Feed Roll Coupler.
28. Tighten the Transmission #40 Drive Chain Idler
Sprocket Clevis Drawbolt Locknut to apply tension to
the Drive Chain and secure by tightening the Axle
Bolt.
See “Transmission (Before 01/2020)” on
Page 5-7.
29. 8FT and 10FT Seeders: Install RH and LH Light
Brackets.
12FT Seeders: Install Turnbuckles to Double Box
RH Support, Double Box Center Bracket and LH
Double Box Mounting Plate.
30. Connect Acre Meter and Warning Lamps.
Figure 2-58: Rear Box RH End Assembly
Flat Washer,5/16
Lock Washer,
5/16
Nut,5/16-18
Bolt,5/16-18 x 1
Bearing Carrier
Nut,1-8
RH Seed Shaft
Locknut,1/2-13
Seed Rate
Adjusting Nut
Adjusting
Screw
Bolt,5/16-18
x 1-1/4
Bearing
Flangette
RH Double Box Support
Nut,5/16-18
Lock Washer,5/16
SL2 OpRearBoxSeedAdjuster