Landoll Brillion SSB, Operator'S Manual

Page: 42 / 102

2-20 1P480rev0718
ASSEMBLY
Seed Shaft Sensor Kit - Brome
Box
1. At the Transmission/left side of Seeder remove 1/4 x
1-1/2 Roll Pin from Seed Shaft Coupler. See
Figure 2-26.
2. Replace Coupler with Coupler with Magnet, insert
existing Roll Pin
3. Insert Sensor into Shaft Sensor Bracket slot.
4. Insert two 5/16-18 x 1” Bolts through Transmission
Case.
5. Align the Shaft Sensor Bracket with the two Bolts.
Secure with Flat Washers, Lock Washers and Nuts.
6. Slide/Position Seed Shaft Sensor so it is 1/8” from
the magnet. See Figure 2-25.
7. Tighten both Retaining Nuts.
Figure 2-25: Brome Box LH Seed Shaft Sensor
Figure 2-26: Brome Box LH Seed Shaft Sensor Bracket
0D[
0DJQHW
6HHG6KDIW
6HQVRU
&RXSOLQJZLWK
0DJQHW
6KDIW6HQVRU
%UDFNHW
7UDQVPLVVLRQ
2XWSXW6KDIW
6HHG6KDIW
([LVWLQJ5ROO3LQ
[
)ODW:DVKHU
/RFN:DVKHU
1XW
6KDIW6HQVRU
%UDFNHW
6HHG6KDIW
6HQVRU
%ROW[
&RXSOHUZLWK
0DJQHW
5HWDLQLQJ1XW
7UDQVPLVVLRQ