1-4
7K555-2401
SAFETY INFORMATION
Figure 1-2: Decals
ITEM 5
528933
ITEM 6
528938
ITEM 4
528934
WARNING
MOVING PART HAZARD
TO PREVENT SERIOUS INJURY FROM
MOVING PARTS:
KEEP COVERS CLOSED DURING OPERATION.
DO NOT ALLOW ANYONE TO RIDE OR CLIMB
MACHINE DURING OPERATION.
KEEP OBSERVERS AWAY.
2K123
ITEM 1
2K123
PARKING PIN
9J301
ITEM 7
9J301
MODEL #
SERIAL #
MADE IN USA
1-573-010006
Landoll Company, LLC
Marysville, Kansas
www.landoll.com
ITEM 14
1-573-010006 - “PLACARD”
ITEM 2 - 8J310
ITEM 3
9J302
ITEM 16
“SS4” - 7K452
“SS5” - 8K599
“SS6” - 7K428
ITEM 8
7K434
CALIBRATION
7K454 FOR SSP4 AND SSP5 SEEDERS
PLANTING RATES
1. RATES ARE BASED UPON USING 13 TOOTH DRIVER SPROCKETS.
2. RATES ARE INTENDED AS A GUIDE ONLY. VARIATIONS IN SIZE AND CLEANLINESS WILL
AFFECT RATES. CHECK ACREAGE AND POUNDS OF SEED USED FOR BEST RESULTS.
* WILL CRACK SOME SEED AT THESE SETTINGS. NOT RECOMMENDED: LENTILS, SORGHUM, SUDAN GRASS
MACHINE MAY BE CALIBRATED FOR UNLISTED SEED AS FOLLOWS:
1. REMOVE CHAIN BETWEEN 17 TOOTH AND 19 TOOTH SPROCKETS.
2. RAISE MACHINE AND LOCK IN TRANSPORT POSITION.
3. PLACE A CANVAS OR TARP ON GROUND TO CATCH SEED.
4. TURN 3/4 HEX ON SPROCKET SHAFT COUNTERCLOCKWISE(CCW)
1195 REVOLUTIONS FOR 4 FOOT SEEDER
955 REVOLUTIONS FOR 5 FOOT SEEDER.
5. WEIGH SEED FOR APPROXIAMTE PLANTING RATE.
6. FEWER TURNS MAY BE USED IF RESULTS ARE ADJUSTED BY
TURNING 3/4 HEX ON SPROCKET SHAFT COUNTERCLOCKWISE(CCW)
239 REVOLUTIONS FOR 4 FOOT SEEDER
191 REVOLUTIONS FOR 5 FOOT SEEDER
AND MULTIPLYING THE WEIGHT BY 5.
13 TOOTH
19 TOOTH
17 TOOTH
IDLER
3/4 HEX
17 TOOTH
34 TOOTH
17 TOOTH
IDLER
26 TOOTH
23 TOOTH
13 TOOTH
DRIVER
17 TOOTH
IDLER
ITEM 9
7K454 - “SSB4 & SSB5”
MACHINE MAY BE CALIBRATED FOR UNLISTED SEED AS FOLLOWS:
1. REMOVE CHAIN BETWEEN 17 TOOTH AND 19 TOOTH SPROCKETS.
2. RAISE MACHINE AND LOCK IN TRANSPORT POSITION.
3. PLACE A CANVAS OR TARP ON GROUND TO CATCH SEED.
4. TURN 3/4 HEX ON SPROCKET SHAFT COUNTERCLOCKWISE(CCW)
795 REVOLUTIONS.
5. WEIGH SEED FOR APPROXIMATE PLANTING RATE.
6. FEWER TURNS MAY BE USED IF RESULTS ARE ADJUSTED BY
TURNING 3/4 HEX ON SPROCKET SHAFT COUNTERCLOCKWISE(CCW)
159 REVOLUTIONS AND MULTIPLYING THE WEIGHT BY 5.
CALIBRATION
7K433 FOR SSP6 SEEDERS
PLANTING RATES
1. RATES ARE BASED UPON USING 13 TOOTH DRIVER SPROCKETS.
2. RATES ARE INTENDED AS A GUIDE ONLY. VARIATIONS IN SIZE AND CLEANLINESS WILL
AFFECT RATES. CHECK ACREAGE AND POUNDS OF SEED USED FOR BEST RESULTS.
* WILL CRACK SOME SEED AT THESE SETTINGS. NOT RECOMMENDED: LENTILS, SORGHUM, SUDAN GRASS
13 TOOTH
19 TOOTH
17 TOOTH
IDLER
3/4 HEX
17 TOOTH
34 TOOTH
17 TOOTH
IDLER
26 TOOTH
23 TOOTH
13 TOOTH
DRIVER
17 TOOTH
IDLER
ITEM 9
7K433 - “SSB6”
CAUTION
1. DO NOT LUBRICATE, ADJUST OR REPAIR WHEN MACHINE IS IN MOTION.
2. DO NOT TOW OR TRANSPORT FASTER THAN 15 MILES PER HOUR.
3. DO NOT RIDE OR ALLOW OTHERS TO RIDE ON THE MACHINE.
4. BLOCK UP ALL HYDRAULICALLY OR MECHANICALLY RAISED COMPONENTS TO PREVENT
UNINTENDED LOWERING OR LOWER THE MACHINE TO THE GROUND TO MAKE ADJUSTMENT
OR REPAIRS OR WHEN NOT IN USE.
5. KEEP ALL PERSONS AWAY FROM MACHINE DURING HITCHING AND OPERATING.
6. SLOW DOWN BEFORE MAKING SHARP TURNS OR USING THE BRAKE.
DRIVE SLOWLY OVER ROUGH GROUND, SIDE HILLS, AND AROUND CURVES TO AVOID TIPPING.
7. COMPLY WITH ALL LAWS WHEN TRANSPORTING THE MACHINE ON PUBLIC ROADWAYS.
8. INSTRUCT ALL OPERATORS IN THE SAFE OPERATION OF THE MACHINE.
REVIEW THE OPERATOR’S MANUAL FOR CORRECT PROCEDURES.
9. BLOCK IMPLEMENT TO PREVENT MOVEMENT WHEN UNHITCHED FROM TRACTOR.
10. KEEP ALL GUARDS AND SHIELDS IN PLACE WHILE MACHINE OR PARTS ARE IN MOTION.
8J310
193500
A LANDOLL PRODUCT
ITEM 10
193500
ITEM 10
4K036
ITEM 12
2P151
AG SEEDER
P/N: 235621
ITEM 13
235621
Sure-Stand
4K401
ITEM 11 - 4K401
247742
ITEM 11 - 247742
CAUTION
ENGAGE PARKING PIN(S)
BEFORE UNHITCHING TO
PREVENT MACHINE FROM
TIPPING.
9J302
PLANTING RATES FOR AGITATOR (REAR) BOX IN POUNDS PER ACRE
1. RATES ARE FOR 13 TOOTH DRIVER. DOUBLE THESE VALUES FOR 26 TOOTH DRIVER
2. RATES ARE INTENDED AS A GUIDE ONLY. VARIATIONS IN SEED SIZE AND CLENLINESS WILL AFFECT RATES. CHECK ACREAGE AND POUNDS OF SEED USED FOR BEST RESULTS.
3. CALIBRATION PROCEDURE IS THE SAME AS FOR METER BOX.
SEED TYPE
AGITATOR
1
2
3
4
5
6
BENT GRASS (L-93 CREEPING)
BLADE
19
61
120
179
245
332
BLUE GRASS (SHERMAN BIG)
BLADE
3
16
41
66
106
143
BLUE GRASS (KENTUCKY-ODYSSEY)
BLADE
10
43
82
124
186
262
BLUESTEM (PAWNEE BIG) (W/BEARDS)
BLADE
0.5
2
3.5
6
8
13
BLUESTEM (WW B. DAHL)(W/O BEARDS
BLADE
1
4
9
19
32
50
BLUESTEM (ITASCA LITTLE)(W/O BEARDS)
BLADE
-
0.5
1.5
3
5
8
BROME (MEADOW)
BLADE
1
3.5
6
9
16
26
BROME (SMOOTH)
BLADE
1.5
4.5
9
16
28
46
BUFFALO GRASS
BLADE
3
12
36
60
89
120
BUFFEL
GRASS
BLADE
- 0.4 1 2 3 5
FESCUE (CREEPING RED)
BLADE
2
7
18
36
70
107
FESCUE (TALL)
BLADE
6
29
62
116
168
230
FESTOLIUM BLADE
8
24
56
81
152
206
GRAMA (SIDE OATS)
BLADE
1
2.5
5
9
14
21
INDIAN GRASS
BLADE
1
2
3.5
6
7
10
ORCHARD GRASS (UNHULLED)
BLADE
2.5
9
21
41
72
114
RYE GRASS
BLADE
3
16
38
65
106
146
WHEATGRASS (INTERMEDIATE)
BLADE
2
7
17
28
49
73
NOT RECOMMENDED: BLUESTEMS OTHER THAN SHOWN, ZORRO FESCUE
7K434 FOR SSBP4, SSBP5, SSBP6, SSBS6 SEEDERS
NOT RECOMMENDED: BLUESTEMS OTHER THAN SHOWN, ZORRO FESCUE
SEED TYPE
AGITATOR
1
2
3
4
5
6
BENT GRASS (L-93 CREEPING)
5-STRIP BRUSH
27
66
117
169
220
259
BLUE GRASS (SHERMAN BIG)
5-STRIP BRUSH
6
21
48
76
111
124
BLUE GRASS (KENTUCKY-ODYSSEY)
5-STRIP BRUSH
17
49
90
132
177
203
BLUESTEM (PAWNEE BIG) (W/BEARDS)
5-STRIP BRUSH
1.5
3
6
11
22
31
BLUESTEM (WW B. DAHL)(W/O BEARDS
5-STRIP BRUSH
2.5
7
16
30
48
60
BLUESTEM (ITASCA LITTLE)(W/O BEARDS) 5-STRIP BRUSH
0.5
1.5
3.5
8
10
12
BROME
(MEADOW)
5-STRIP
BRUSH
2 5 9 16 28 45
BROME (SMOOTH)
5-STRIP BRUSH
3
7
15
26
43
71
BUFFALO GRASS
5-STRIP BRUSH
4
16
43
75
100
112
BUFFEL GRASS
5-STRIP BRUSH
-
0.5
1.5
2.5
5
6
FESCUE (CREEPING RED)
5-STRIP BRUSH
4
11
25
46
74
116
FESCUE (TALL)
5-STRIP BRUSH
10
37
75
146
210
230
FESTOLIUM
5-STRIP
BRUSH 13 35 65 120 207 238
GRAMA (SIDE OATS)
5-STRIP BRUSH
1
3.5
5
14
22
30
INDIAN GRASS
5-STRIP BRUSH
1.5
3.5
8
13
22
32
ORCHARD GRASS (UNHULLED)
5-STRIP BRUSH
4
14
31
57
108
124
RYE GRASS
5-STRIP BRUSH
8
23
50
92
156
176
WHEATGRASS (INTERMEDIATE)
5-STRIP BRUSH
3.5
12
24
44
85
112
INDICATOR SETTINGS
INDICATOR SETTINGS
