Landoll Bendi B40i4, Operator'S Manual, Page: 56 / 66

5-2 F-808-R0
Date Driver
Truck
number
Model
Number
Location
Number
Serial
Number Shift Hr. Meter
Hydraulic
Oil
Operator’s Daily Checklist
Safety and Operational Checks Condition/Operation
Status
Notes
Fuel Odor If present, do not start truck! Report immediately
Forks Check Top Clip Retaining Pin and Heel conditions
Load Backrest Overall condition
Lift and Loweing Control Functioning smoothly.
Tilt Control Forward and Back functioning smoothly
Sideshift Control Functioning smoothly.
Hang-on Attachment
Functioning smoothly, securely attached, fittings
attached
Steering Operation Functioning smoothly.
Drive and Stop Pedals Functioning smoothly.
Controls
With power on, investigate any unusual noises
immediately
Dash Display Functioning properly.
Horn, Lights, Seat Switch Functioning properly.
Parking Brake Holds forklift in stopped position.
Drive Control Forward/Reverse functioning smoothly.
Engine Air Cleaner Clean and check dust ejector
Engine Belt Check for wear.
Battery Check for cracks.
Hood and Seat Latch Function properly.
Capacity Plate
Attached, matches Model, Serial #, and
Attachments; Operator’s manual in case
Seat Belt Make sure buckle and retractors function smoothly
Overhead Guard Properly mounted and attached.
Radiator Check level in Overflow Tank.
LPG Hoses Check for damage, kinks and correct fitting.
LPG Tank
Securely attached; free of rush, corrosion and
damage
Overall Machine Keep clean and tidy appearance.
Engine Oil
Check level.
Hydraulic Fluid Check level.
Tires
Check for debris; Torque Tire Lug Nuts to 205 ft/lb
(275 Nm)
Major Structural Points
Check for cracks in Front Rotation, Mast Braces,
Overhead Guard, etc
Hydraulic System
Check for leaks, noise, and proper function.
Safety Warnings Attached.