![background image](http://html2.mh-extra.com/html/landoll/bendi-b40i4/bendi-b40i4_maintenance-manual_3515299059.webp)
TROUBLESHOOTING AND CORRECTIVE MAINTENANCE
3-11
VISIBLE PROBLEMS
Leaking fluid.
**Cont’d on next page for clarity**
Cracked, split, or cut hoses.
Loose or faulty hydraulic fittings.
Pump or motor oil seals, rings,
gaskets, etc. deteriorated by
excessive heat or corrosion.
• Replace. NEVER attempt to patch
a hose.
• Tighten and/or replace. Be careful
not to strip the threads, rendering
the fitting defective.
• Replace seals in bad unit or
replace unit.
• Check appropriate vendor service
information, where applicable.
Problem
Cause
Suggested Repair
Summary of Contents for Bendi B40i4
