TROUBLESHOOTING GUIDE
5-9
Remote Control
PROBLEM
PROBABLE CAUSE
SOLUTION
NO FUNCTIONS WORK
Check that transmitter power is on.
Self-explanatory
Check that transmitter power is on
Self-explanatory
Check system wiring for power into the
system.
Tighten loose connections
Check LED status display for system
status.
Self-explanatory
Check for proper grounding of system’s
electrical circuit.
Self-explanatory
Check system’s hydraulic system.
Clean or replace as necessary.
CERTAIN FUNCTIONS DO NOT WORK
Check the wiring connection from the
system to the valve coil for the output
function that does not work.
Tighten loose connections
Check LED status display for possible fault
or error indication.
Self-explanatory
Check hydraulic system
Clean or replace as necessary.
Check electrical system
Tighten loose connections
FUNCTIONS OPERATE
INTERMITTENTLY
Loose connector at the valve coil
Tighten loose connections
Check LED status display for system
status
Self-explanatory
Check receiver antenna for any damage
and proper connection.
Service or replace.
Check hydraulic system.
Clean or replace as necessary.
