Landoll 317D, Operator'S Manual

Page: 9 / 88

2-1
Chapter 2
Standard Specifications
MODEL 317D/318D
CAPACITY*:
TANDEM AXLE (MODEL 317D)
70,000 LB. DISTRIBUTED
STANDARD FRAME DESIGN
50,000 LB. CONCENTRATED IN 10’
TRIPLE AXLE (MODEL 318D)
100,000 LB. DISTRIBUTED
STANDARD FRAME DESIGN
70,000 LB. CONCENTRATED IN 10’
SWING OUT OVERWIDTHS AND PULL OUT EXTENSION MAXIMUM CAPACITY IS ONE HALF FRAME
CAPACITY LISTED ABOVE.
GOOSENECK:
HYDRAULIC TILT
KING PIN SETTING:
MODEL 317D
18” or 24” (Standard is 24”)
MODEL 318D
26”
UNDERCARRIAGE TRAVEL:
LOW LOAD ANGLE
14’-0”
GROUND LOAD ANGLE:
LOW LOAD ANGLE
8.5º
MAXIMUM TILT ANGLE
13.3º
DOCK LEVELER CAPACITY:
MODEL 317D
1 PAIR 60,000 LB.
MODEL 318D
2 PAIR 62,000 LB. (124,000 LB.)
NOTE: DOCK LEVELER NOT AVAILABLE W/ 17.5 LOW PROFILE TIRES
HYDRAULIC HOOKUP:
QUICK COUPLERS
FLAT FACE 3/4” BODY SIZE
MAXIMUM OPERATING PRESSURE
2500 PSI
OPERATING FLOW
17 GPM