Landoll 1550 Series, Operator'S Manual

Page: 28 / 36

4-2 F-298-0111 Edition
OPERATION AND MAINTENANCE
Figure 4-1: 3 Point Hitch Setup
Tractor Preparation
The 1550 Series In-Row Ripper may be used on tractors
equipped with category II or III three-point hitches. Before
attaching the In-Row Ripper, prepare the tractor as
follows:
The rear tractor tires should be inflated equally and
ballast added according to the tractor operator’s manual.
For mounted type models, install front end weights as
needed on tractor to maintain stability.
m1550-hitch
A & B FRAMES - CAT III HITCH
A & B FRAMES - CAT II HITCH
C, D, & E FRAMES - CAT III HITCH