Operator Manual S755 (G2) / S755 XL (G2)
October 2017
Landis International - 3
OPERATING THE LANDIS FINISHER S755
(G2) /
S755 XL
(G2)
RISK OF INJURY
•
DISCONNECT TOOLS BEFORE SERVICING AND LOCK THE SWITCHES.
•
EYE PROTECTION SHOULD ALWAYS BE WORN BY THE OPERATOR AND OTHERS IN THE WORK AREA WHEN THE
SANDER IS IN USE.
•
EYE PROTECTION IS REQUIRED FOR PROTECTION FROM FLYING DEBRIS AND DUST, WHICH COULD CAUSE EYE
INJURY.
•
AVOID KICK BACK BY SANDING IN ACCORDANCE WITH THE DIRECTIONAL ARROWS.
•
CLOSE SANDING DOORS BELT BEFORE OPERATING THE MACHINE.
•
CLOSE THE MAIN ACCESS DOOR AND FAN COVER BEFORE OPERATING THE MACHINE.
INSTALLATION
The S755
(G2)
/
S755 XL
(G2)
Landis Finisher should be located on a flat, firm surface,
in an area free of obstructions that could interfere with the safe operation of the
equipment. The finisher should be mounted on four wheels. In this way, the wheels
are practical to clean and move the machine.
•
ALL ELECTRICAL WORK MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN AND MUST CONFORM TO ALL
STATE AND LOCAL ORDINANCES.
•
DO NOT, UNDER ANY CIRCUMSTANCE, TAMPER WITH, MODIFY, OR ADAPT THE ELECTRICAL PLUG AND CORD
PROVIDED WITH THIS MACHINE.
ELECTRICAL CONNECTIONS
Electrical connection may be made by either plugging the provided electrical
cord into an appropriately wired electrical socket, or by wiring the machine
directly into an electrical disconnect box.
The customer must ensure that the
voltage is 230 V
.
•
IF THE ELECTRICAL CORD, PLUG OR WIRING SHOULD BECOME FRAYED OR DAMAGED, REPLACE IT AT ONCE.
DO NOT ATTEMPT TO OPERATE THE MACHINE WITH FAULTY WIRING AS IT COULD RESULT IN SEVERE INJURY
OR DEATH.
NOTE: REFER TO THE MACHINERY IDENTIFICATION PLATE TO DETERMINE THE ELECTRICAL SPECIFICATIONS
OF THIS MACHINE IN RESPECT TO VOLTAGE, PHASE AND AMPERAGE REQUIREMENTS.
•
DO NOT START FINISHER BEFORE CHECKING FOR PROPER SANDING BELT TRACKING.
