Troubleshooting
Entering Diagnostic Mode Procedures
42
• Use the up and down keys to move between the selections
• Press
Start
to enter the selection
• Press the Left arrow to return to the Menu screen.
6.2.2. Rehabilitation Treadmill (RTM)
Press FAST and START to enter diagnostics. Hours and Miles are not available for these models.
Table
6-3
Executive Control Diagnostic Modes
Function
Description
Error Logs
Shows you a list of all error codes recorded
Diagnostics
Shows information for the following functions:
Speed sensor feedback (formerly known as OLS mode)
Pot- Shows Pot Calibration
Pulse-test if the pulse (Contact or Chest Strap) reading is being transmitted and
received
Hours and Miles
Software Version of the Display Board
Button Check
Checks membrane buttons
Touch Screen Check
Shows if different parts of the Touch Screen are functioning
NV INIT-Boot
Not for Diagnostics
Self Diagnostic
Will run a check on the functions of the unit and report problems found
Lock out
Allows user to input a code to prevent unauthorized use
Toggle Units
Allows selection of English or Metric units to measure speed and miles
Toggle Beeper
Allows selection of turning Beep on or off
Toggle User Presence On machines equipped with this option it will turn off the machine when no activity is
recorded
Toggle Max Grade
On machines equipped with this option it will allow the selection of 12% or 15% grade
Toggle Max Speed
On machines equipped with this option it will allow the selection 11 mph or 15 mph or
the corresponding values in kilometers
Toggle Client
Allows the use of the Client feature
Summary of Contents for L7 Club
