Landice 90 Series Owner'S Manual Download | Manualshive

Page: 71 / 114

background image

Cardio Treadmill Operation

71

5.7.2. User-Defined Heart Rate Programs

The User-Defined Heart Rate Monitoring (HRC) programs are
designed to allow you to set the target heart rate for up to 20
program segments.

To customize a User-Defined HRC Program during your
workout, adjust your Target Heart Rate in the Heart Rate Status
screen by holding the ENTER key for three seconds. Any
Target Heart Rate changes you make during your workout will
be saved in that User-Defined HRC Program.

If you want to edit your User-Defined HRC Program before your
workout, follow these steps:

1. To select an HR program to edit, press

HR PROGRAMS

.

To scroll through the programs, either continue pressing

HR

PROGRAMS

or use the arrow

keys. Select a User-Defined

HRC Program to edit by pressing

ENTER

.

2. Select your maximum speed

using the numeric keypad or
arrow

keys and press

ENTER

, or wait 3 seconds.

3. Enter the maximum incline

using the numeric keypad or
arrow

keys. Press

ENTER

or wait 3 seconds.

4. The display prompts

PRESS START TO BEGIN
OR ENTER TO EDIT. Press

START

to run the program or press

ENTER

to begin Edit

Mode and make changes if desired.

5. To change segments, press either arrow. You can change

segments in either the forward or reverse direction.

«
...
69
70
71
72
73
...
»

Summary of Contents for 90 Series



















































































































Reviews:

No comments

Related manuals for 90 Series

Brand: U.N.O Fitness Pages: 32

495 LS CrossWalk

Brand: ProForm Pages: 19

Brand: LA Fitness Pages: 12

Brand: ICON Health & Fitness Pages: 16

Brand: Healthstream Pages: 55

NordicTrack COMMERCIAL 2450

Brand: iFIT Pages: 40

Brand: Yowza Pages: 40

Brand: Smooth Fitness Pages: 39

Brand: Smooth Fitness Pages: 42

Brand: Smooth Fitness Pages: 91

Brand: Insportline Pages: 17

Brand: ProForm Pages: 32

Brand: Pro-Form Pages: 32

Brand: Landice Pages: 36

360 P PETL3013.7

Brand: Pro-Form Pages: 12

Brand: NordicTrack Pages: 26

Brand: NordicTrack Pages: 34

Brand: NordicTrack Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands