Installation Guide
Part E
Page 6
Installation Guide
Part E
Page 6
E2.3 Multiple imager system cable connections
When multiple imagers are used in a system, the video and communications
cables must be connected together in a parallel or daisy chain configuration
(refer to Fig. E7). Up to 16 imagers can be used in a multiple imager configuration
each having its unique channel set with the channel selector switch, for
communications details refer to Section E3.2.
TI990009A
BNC T-piece
Fig. E7 Multiple Imager connections (RS485)
NOTE
Each imager must be given a unique imager address number, when
used in a multiple imager configuration. For details on setting up an
FTI 6
refer to Part F.
CABLE TYPES
12V d.c.: 2 core screened, 3A
RS485: Twisted pair screened, 7/0.12
Video: Triax 75
Ω
Screens to be earthed at gland (refer to Section E7), cable diameters 6.8 to
8.8mm.
E2.3 Multiple imager system cable connections
When multiple imagers are used in a system, the video and communications
cables must be connected together in a parallel or daisy chain configuration
(refer to Fig. E7). Up to 16 imagers can be used in a multiple imager configuration
each having its unique channel set with the channel selector switch, for
communications details
refer to Section E3.2.
TI990009A
BNC T-piece
Fig. E7 Multiple Imager connections (RS485)
NOTE
Each imager must be given a unique imager address number, when
used in a multiple imager configuration. For details on setting up an
FTI 6
refer to Part F.
CABLE TYPES
12V d.c.: 2 core screened, 3A
RS485: Twisted pair screened, 7/0.12
Video: Triax 75
Ω
Screens to be earthed at gland
(refer to Section E7)
, cable diameters 6.8 to
8.8mm.
