background image

Introduction 

Table of Contents

2/5/19

SGC0548 Grapples 380-138M

5

The parts on your Claw Grapple have been specially 
designed by Land Pride and should only be replaced with 
genuine Land Pride parts. Contact a Land Pride dealer if 
customer service or repair parts are required. Your Land 
Pride dealer has trained personnel, repair parts, and 
equipment needed to service the attachment.

Serial Number

For quick reference and prompt service, record model 
and serial number on the inside cover page and again on 
the warranty page. Always provide model number and 
serial number when ordering parts and in all 
correspondences with your Land Pride dealer. For 
location of your serial number plate, see Figure 1.

Serial Number Plate Location

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new Claw 
Grapple. If for any reason you do not understand any part 
of this manual or are not satisfied with the service 
received, the following actions are suggested:

1.

Discuss any problems you have with your attachment 
with your dealership service personnel so they can 
address the problem.

2. If you are still not satisfied, seek out the owner or 

general manager of the dealership, explain the 
problem, and request assistance.

3. For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

[email protected]

35826

Introduction

Land Pride welcomes you to the growing family of new 
product owners. This Claw Grapple has been designed 
with care and built by skilled workers using quality 
materials. Proper assembly, maintenance, and safe 
operating practices will help you get years of satisfactory 
use from this product. 

Application

The Land Pride SGC0548 Claw Grapple has uses in 
moving light materials, loose hay, small hay bales, limbs, 

trash, and other light debris. They have applications in 

small estates, farming, ranching, small vineyards, small 
orchards, resorts, nurseries, and campuses. 

It is 48" in width and designed exclusively for attaching to 
Kubota 60 & 70 Series BX tractors with a front loader. 
BX Kubota tractor users will find this Land Pride 
attachment saves time and money while getting that 
material handling job done a whole lot easier.

For additional information, see “

Specifications & 

Capacities

 

on page 17 and 

Features & Benefits

” on 

page 18.

Using This Manual

This Operator’s Manual is designed to help familiarize 
the operator with safety, assembly, operation, 
adjustments, troubleshooting, and maintenance. Read 
this manual and follow the recommendations to help 
ensure safe and efficient operation.

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com.

Terminology

“Right” or “Left” as used in this manual is determined by 
facing the direction the machine will operate while in use 
unless otherwise stated.

Definitions

Owner Assistance

The dealer should complete the Online Warranty 
Registration at the time of purchase. This information is 
necessary to provide you with quality customer service.

IMPORTANT: 

A special point of information related 

to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing. 

NOTE:  

A special point of information that the 

operator should be aware of before continuing. 

Summary of Contents for SGC0548



























Reviews: